Aqua Mix Sealers Choice Gold Penetrating Tile Sealer
Features
Premium, no-sheen, natural look, low VOC, water-based penetrating sealer formulated to provide maximum stain protection, especially in food preparation and serving areas
NEW Rapid Cure Formula protects in less than 4 hours and is designed to achieve optimal penetration into dense, low-porosity surfaces
May also be used as a pre-grouting sealer over clean stone surfaces a minimum of 1 hour prior to grouting
Use on all natural stone (such as marble, granite, slate, travertine, and limestone), porcelain, quarry, saltillo, terra cotta, cement pavers, masonry surfaces, and other porous tile and grout where a natural look is desired
Not recommended for use with composite or engineered stone
Expected wear is up to 15 years. Extreme weather conditions, harsh cleaning methods and high-alkaline or solvent-based cleaners will affect wear
Effective for interior and exterior applications
Coverage: Approximately 300 to 1,500 sq. ft. per coat per gallon, depending on type of stone, porosity and texture of surface, temperature, humidity and method of application
Tile and Stone Sealer Application
For new installations, sealer can be applied as soon as 48 hours after grouting
Surface must be clean, dry, and free of existing sealers or coatings
Apply using a sponge, brush, paint pad, cotton towel, or sprayer
Be sure any sealer that does not penetrate surface is removed from surface within 5 minutes of each application using absorbent paper or cotton towels
If 2 or more coats are applied, allow a minimum of 30 minutes drying time between coats
2 hours after final coat conduct a test to determine if surface is completely sealed by applying water droplets to the surface
If water is absorbed, apply an additional coat. Wait 2 hours and repeat the test
Ready for surface traffic in 2 hours after final coat
Keep area dry for 12 hours, achieves a full cure in 24 hours
Clean applicator tools with water after each use
Pre-Grouting Application apply over clean stone or tile a minimum of 2 hours prior to grouting, follow application procedures above
