Dewalt DXH215HD Forced Air Kerosene Construction Heater
The DXH215HD thermostatically controlled forced air kerosene heater burns at 215,000 BTU/HR and can be used with kerosene diesel, fuel oil or JP-8 fuels. With a included wheel kit, protective roll cage and an 14 gallon tank you will get a full 8 and a half hours of run time and the ability to heat up to approximately 5375 square feet of space.
Features
- Equipped with a 25°F-95°F thermostat. The heating element cycles on and off to maintain the set temperature.
- 10″ Flat free tires for long lasting maintenance free use
- Roll cage style handles provide solid all around protection and support
- Recessed controls designed to reduce the risk of having the knobs or valves damaged on the jobsite.
- Continuous electronic ignition is always present as a source of ignition for unburned fuel, reducing the ability for fuels to pool and collect in a dangerous manner
- Front barrel support and storage provides added barrel rigidity and creates storage for wet gloves or service parts like filters or igniters
| DeWalt DXH215HD Heater Specifications |
| Model |
DXH215HD |
| Fuel Tank Capacity |
14 gal |
| Maximum Heating Area |
6500 sq. ft. |
| Ignition Type |
Continuous Spark |
| Fuel Consumption Rate |
2.354 gal/hour |
| Heat Rating |
215000 btu/hour |
| Run Time |
9.5 hr |
| Length |
19-3/4″ |
| Height |
18″ |
| Width |
18″ |
Weight |
76.9lbs |
