Availability: 8 in stock
iQ Power Tools four stage cyclonic dust extractor with HEPA filtration offers a multi-stage cyclonic pre filter for longer run times. The iQ426HEPA cyclonic pre filter allows less than 1% of the dust to reach the filter, providing faster clean up and saving time and money
| iQ426HEPA Cyclonic Dust Extractor Specifications | |
| Voltage | 120V, 60HZ |
| Motor Power/ Amperage | 1800W/ 15 amps |
| Air Flow | 190 CFM/ |
| Vacuum lift | 100″ |
| Hose Length | 14 ft. / 4.26 m |
| Hose Diameter | 2″/ 50mm |
| Power Cord | 10 ft./ 3m |
| Sound Level | 84.5 DB |
| Pre Filter | 7 Cyclones |
| Filter Type | iQ Durabond Cartridge |
| Area, sq. ft (M2) | 11 lbs. or over 500 linear ft. |
| Vac Dimensions | 23″ x 41″ x 34″ |
| Weight | Vac 60 lbs/ Cart 23 lbs |
Cyclonic dust extraction systems utilize centrifugal force to separate dust and debris from the air. The incoming air carrying dust enters a conical chamber where it begins to spin rapidly. The centrifugal force causes heavier particles to move to the outer wall of the chamber, allowing cleaner air to move toward the center and exit.
High-Efficiency Particulate Air (HEPA) filters are designed to capture very small particles, including fine dust and allergens, from the air. In a vacuum with a HEPA cyclonic dust extractor, the air from the cyclonic separation chamber is typically passed through a HEPA filter before being released back into the environment.