Laticrete Quick Cure Hydro Ban Waterproofing Membrane – 1 Gallon
Hydro Ban Quick Cure is a rapid, ready-to-use waterproofing membrane with wet-sure technology that allows it to cure even in humid, cold, or damp environments. The Quick Cure waterproofing membrane allows for flood testing within just 30 minutes—the contractor can install a full shower system all in one day!
Features
- 1-gallon unit approximate coverage – 134 ft/gal
- Designed for both commercial and residential tile installations suited for interior substrates
- Easily applied with a paintbrush or roller
- Bonds directly to metal, PVC, stainless steel, and ABS drain assemblies
- It can be used in humid, cold, and damp environments
- Allows for flood testing in 30 min. at 70°F (21°C) or higher
- Allows for crack isolation up to 1/16 when applied at 30 mils thick; anything over will require the use of fabric within any cove, corner, movement joint, and other areas of transition
- Thin; only 0.012″ (0.3 mm) thick when cured
- Exceeds ANSI A118.10
- No solvents and non-flammable
- Install tile, brick, and stone directly onto the membrane
- Eco-friendly, Low VOC
Uses
- Swimming pools, fountains and water features
- Shower pans, stalls, and tub surrounds
- Industrial, commercial, and residential bathrooms and laundries
- Spas and hot tubs
- Kitchens and food processing areas
- Terraces and balconies over unoccupied spaces
- Countertops
Suitable Substrates
- Concrete
- Concrete and Brick Masonry
- Cement Mortar Beds
- Cement Plaster
- Gypsum Wallboard
- Exterior Glue Plywood
- Ceramic Tile and Stone
- Cement Terrazzo
- Cement Backer Board
- Poured Gypsum Underlayment
