SikaTile – 100 Moisture Guard
SikaTile—100 Moisture Guard is a single-component, fast-drying, thin-mil, load-bearing waterproofing, and crack isolation membrane for installation under ceramic tile or stone in residential, commercial, and industrial environments. With excellent elongation, adhesion, and high-strength properties, it provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage.
Features
- Coverage: 50 sq. ft. per gallon at 30 mils thick
- Ready to use – stir by hand before use
- For use in areas that require positive waterproofing
- Crack Isolation up to 1/8”
- Fast drying, foot traffic in 2 – 4 hours
- Flood test after 4 – 6 hour cure
- Antimicrobial for mold and mildew resistance at the substrate
- Easy installation with brush, roller, or trowel
- Low VOC’s
- Color blue (dries to a darker blue)
- Exceeds ANSI A108.01, A108.17, A118.10, and A118.12 of the American National Standards for the Installation of Ceramic Tile ASTM International
- 15 months from the date of production when stored in an original, sealed package
Suitable Substrates
- Brick Masonry
- Cement Backer Board
- Cement Mortar Beds (cured)
- Cement Terrazzo
- Concrete
- Exterior Grade Plywood (interior use only)
- Gypsum Drywall (interior use only)
- Gypsum Mortar Bed
