DrilRite SureFlow Sand Drilling Fluid

DrilRite SureFlow Sand Drilling Fluid (DF DR SUREFLOW SAND)

SureFlow is a proprietary drilling fluid additive formulated by DrilRite-Chem LLC for use in sand, gravel, and rock formations. When added to bentonite slurry, it delivers exceptional gel strength, fluid loss control, and improved flow properties. SureFlow has been field-tested with 100% satisfaction by multiple HDD companies across various U.S. applications and is non-hazardous to the environment.

Mixing Instructions:

SureFlow is pre-mixed and packaged for easy use with 500-gallon or 1000-gallon mix tanks, minimizing the need for advanced drilling fluid mixing knowledge, labor, and waste. To use:

• Add 1 bag of bentonite for sand or 1.25 bags for gravel per 250 gallons of fluid, along with the appropriate SureFlow container to the mix tank.
• When reclaiming, add 1 bag of SureFlow for every 6 bags of bentonite until the desired viscosity is achieved.

Typical Physical Properties:

• Form: White/off-white powder
• Specific Gravity: 0.9
• pH: 10-10.5 in water
• Solubility: Highly dispersible in water

ALL LIQUID SAND Products are strictly recommended for smaller diameter/ length bores.

*SureFlow Sand is simple, affordable and it works on any size diameter / length bore.

**12.8 oz. min per 500 Gallons for ClayRite and DetRite. Ratio = 1:5000

64 oz. min per 500 Gallons of all competitors like products. Ration = 5:5000

**SureFlow Clayis a COMBO of DetRite and ClayRite. 25.6 oz per 500 Gallons for inhibition and wetting agent. No one else has this or SureFlow Sand available.

• *There are the minimum amounts recommended based on typical ground conditions. Amounts needed may vary depending on the situation.
• Any liquid sand product is only recommended for smaller diameter / short bores. For larger diameter bores in sand use SureFlow Sand per label instructions for best results.

**A viscosity cup = 1 Quart (Qt)

Certified to NSF/ANSI 60